Abstract sculpture of interwoven metallic filaments and particles

Dubai, UAE

Designed on screen.Finished by hand.

Dental technician in Dubai. Every case by Yaman Wazzan.

Designed and finished by the same hands.

From the first line of the smile design to the last pass of glaze, one technician carries your case. Nothing gets reinterpreted.

01Digital design

Smile design, wax-up and restoration design, planned against your scans.

02Ceramic finish

Layered, characterized and glazed by hand to match the design.

Selected work.

  • Front view of a full upper arch of ceramic veneers built up on a perforated refractory model, against a black background

    Built up, in balance.

    The full arch from the front: the central incisors mirror each other and the shapes step down evenly to each side.

  • An upper arch of ceramic veneers on a refractory model seen at an angle, with red finish lines at the margins

    The same arch, at an angle.

    Turned to one side, the build-up shows its finish lines in red and the gloss carried across each surface.

  • A full upper arch of ceramic veneers on a perforated refractory model, seen from slightly below against a black background

    Refractory build-up.

    Ceramic built up on the refractory model, shown from slightly below, with its margins in view.

  • Ceramic restorations built up on a perforated refractory model, with red finish-line markings at the margins

    Finish lines, up close.

    Ceramic built up on the refractory model, with the finish line marked in red at the margin.

  • Ceramic build-up on a refractory model seen from the side, showing its curvature and glossy surface

    Build-up, from the side.

    In profile, each restoration follows the curve of the arch and the glaze carries the light along its surface.

  • Digital temporaries with visible surface texture on a gum-colored model

    Digital temporary, with texture.

    Surface texture is designed in, so the temporary already previews the character of the final work.

  • A full arch of digital temporaries on a model, still attached to their print supports

    Digital temporary, on its supports.

    Printed from the approved design and shown still attached to its print supports.

  • A mock-up of an upper arch on a model, with a yellow silicone key out of focus beside it

    Mock-up with a silicone key.

    The approved mock-up on the model, with the silicone key beside it for trying the design in the mouth.

Two disciplines, one standard.

Ceramic

Finished by hand, to the shade you send.

01 / 06
  1. The specialty

    Feldspathic Refractory Veneers

    Porcelain layered by hand on refractory dies and fired in thin layers, for natural depth and translucency.

  2. E.max Restorations

    Lithium disilicate crowns and veneers, characterized by hand.

  3. Zirconia Restorations

    Zirconia crowns and bridges, stained and glazed to the shade you send.

  4. Full-Arch Zirconia

    Full-arch zirconia prostheses, finished for strength and a natural gingival appearance.

  5. AOX Bar & Zirconia

    A precision bar beneath a zirconia superstructure, for implant-supported full arches.

  6. Ceramic Characterization

    Artistic surface detailing, customized shade and natural texture — crafted by hand.

Digital

Planned and designed against your scans.

DSD

The smile is planned on the patient's face and scans before anything is made.

Crown & Bridge

Single crowns and bridges designed to the margin, ready for the material the case needs.

Implant Design

Abutments and implant crowns planned from the scan, with the emergence profile in mind.

Full-Arch / All-on-X

Full-arch prostheses on four or more implants, planned digitally from start to finish.

A mock-up of an upper arch on a model, with a yellow silicone key out of focus beside it

Digital Wax-Up

The approved design as a model, with a silicone key for the chairside mock-up.

A full arch of digital temporaries on a model, still attached to their print supports

Digital Temporaries

Printed from the approved design, so the provisional already previews the final shape.

Materials and systems we work with

  • iLab
  • Noritake Dental
  • Ivoclar
  • DEKEMA
  • exocad
  • 3Shape
  • Asiga
  • Straumann
  • Nobel Biocare

About Yaman Wazzan

Yaman Wazzan on a walkway in Dubai, looking out toward the Museum of the Future and the Sheikh Zayed Road towers

Working with a technician should be simple. I’m here to take the friction out: one technician, one standard, from the first scan to the final glaze.”

Yaman WazzanDental technician, Dubai, UAE

Made in Dubai, one case at a time.

Yaman Wazzan works from Dubai and designs and finishes every case himself, so he takes on a limited number at once.

Yaman Wazzan
  • Licensed by the DHA

    Licensed by the Dubai Health Authority.

  • Send from any scanner

    Exocad, Medit, iTero and others, through iLab or the software you already use.

  • Impressions welcome

    Physical impressions are accepted alongside digital cases.

Send the case. Let’s Dubai-it.

Message Yaman
Message Yaman